ACCESSORIES

 

SynchroMate

Simple but precise carburettor synchronisation by direct comparison of a set of carbs. 

SynchroMate offers accurate electronic measurement at a cost no more than a good set of dial gauges. 

Synchronisation of 4 linked carburettors is made easy using the optional 4-channel adapter kit

SynchroMate displays the difference in vacuum intake settings of two linked carburettors very precisely on a single transverse "East-West" display. Visual estimation errors, common to the traditional approach which is to visually compare the individual values on separate columns of mercury or dial gauges, are eliminated as two pressures are compared and one value is displayed. 

A single LED flashing at the dead-centre "Pa" mark indicates that the compared manifold vacuums are equal to within 0,5 cmHg (centimetres of mercury). 

Where different vacuum intake values are required for each carburettor, such as with Mariner and Yamaha 4-stroke outboards, the exact positive or negative difference between two carburettors can be read off the "differential" scale, which is calibrated from.

Actual intake vacuum of one carburettor can be read with a flick of a switch, displayed on a 0 - 60 cmHg scale. Synchronisation of 4 linked carburettors is made easy using the optional 4-channel adapter kit. A simple flick of a switch activates the built-in tachometer which allows adjustment of engine speed between 500 and 2000 rpm prior to and after synchronisation.

The compact, solid state electronics makes the SynchroMate very durable and reliable. A rubber holster provides protection against mechanical shocks and knocks.

Power is provided from the vehicle battery or an external 12V battery via a 2-meter (6 ½ ft) power cable with large crocodile clips. Periodic calibration is very simple: without any tubes connected, adjust the single screw until the centre LED flashes. An instruction manual is provided in the language of your choice.

Threaded connection adapters in either all-metal or the unique "flexi-rigid" style that allow easier connection to difficult to reach manifold points are available. The standard kit includes 2 x M5 and 2 x M6 threaded adapters, a T piece and 12VDC powercord. A specially designed carry case for storing the SynchroMate & kit is available as an option. Further options include permanent manifold connection kits for anytime quick & easy synchronizing without the bother of fitting and removing temporary adapters (Click on Accessories, then Manifold perma-adapter(s)).

A two year limited warranty is offered. Service centres in Europe, USA and Canada.

Optional soft carrying/storage case available

 

ROTAX / Aircraft OPTIONS

OTHER ACCESSORIES